SPT Correlations Software NovoSPT

NovoSPT Download Trial Version Over 300 Correlations with SPT Bearing Capacity Estimations from SPT Wildcat Penetrometer & Durham DCP Modules Statistical Report and Powerful Presentation of the Results User Friendly and Quick Installation

SPT Correlations Software – NovoSPT

The Standard Penetration Test (SPT) is the most popular and economical test for evaluation of subsurface information, both on land and offshore. This test is widely used to obtain the bearing capacity of soil for shallow and deep (pile) foundations. Blow counts (N) measured in the field are corrected for rod length, borehole size, sampler type, and hammer energy level. The corrected blow counts (N60) are then used for estimation of various soil properties and bearing capacity.

320 SPT Correlations!

NovoSPT is a powerful, user-friendly geotechnical software for correlating soil properties from SPT blow counts. We have gone through more than 70 published papers and geotechnical reference books and collected over 320 SPT correlations with various soil properties.

All Geotechnical Engineer Use SPT / DCPT to Estimate Soil Properties & Bearing Capacity. NovoSPT Will be Your Best Tool for Your Future Projects!

NovoSPT comes with a complete help file (accessible from inside the program), and user’s manual in PDF and eBook formats to allow you getting up-to-speed in a very short time.

 

  • NovoSPT

    Version 3.0.2020.819
    User’s Manual (PDF)
    User’s Manual (eBook)
    Online Help
    Software Brochure
    Sample Report
    User Agreement (EULA)
    View Update Log

  • System Requirements

    Min. 1024×768 Screen Resolution
    Windows 7, 8, 8.1 and 10 (up-to-date)
    Microsoft .Net 4.5.2
    100 MB of Disk Space

List of Correlated Soil Parameters

  • Modulus of Elasticity (Es)
  • Internal Friction Angle (Φ)
  • Relative Density (Dr)
  • Undrained Shear Strength (Su)
  • CPT Tip Resistance (Qc)

  • Over Consolidation Ratio (OCR)
  • Shear Wave Velocity (VS)
  • Shear Modulus (Gmax)
  • Cyclic Resistance Ratio (CRR)
  • Wildcat Cone Resistance (Qd)

  • Compressibility Factor (Mv)
  • Normalized Dilation Angle
  • Foundation Settlement
  • Saturated Unit Weight (γ)
  • Initial Modulus of Stiffness (G0)
  • Modulus of Subgrade Reaction (KS)
  • Pressure Meter Menard Modulus (Epmt)
  • Bearing Capacity of Footings and Piles

2020 Version with Equations!

The new version of NovoSPT shows the equations used for each correlation. Just click on each correlation and the equation will be shown below the list of correlations. Equations have also been included in the report. In 2020 version of NovoSPT, several improvements and new features were added to the user interface and report generation.

Online Order

Your online order takes only 5 minutes! You will receive the download link and an “activation code” by email immediately after your purchase. If you have not decided yet, grab a cup of coffee and watch the following short introduction video.

License TypePrice (USD)Buy
NovoSPT (12 month lease)$350.00 / yearSubscribe!
NovoSPT (6 month lease)$225.00 every 6 monthsSubscribe!
NovoSPT (Perpetual License)$600.00Order Now!

Correction of SPT Blow Counts

The program automatically applies the following corrections on SPT field data (N) to obtain N60 and N1(60):

  • Borehole Size
  • Sampling Method
  • Rod Length
  • Energy Level
  • Overburden Stress Corrections (covers 9 methods)
  • Water Level Correction (optional – for bearing capacity analysis when N60≥15)

Use The Right Correlations!

Every correlation is developed for certain soil type(s). NovoSPT knows that. At a specific depth, based on the site stratigraphy NovoSPT only used the correlations that are developed for that type of soil. We have categorized the soil types as Clay, Silt, Sand and Gravel. Each correlation may be valid for one or a combination of these soil types.

Bearing Capacity Analysis

Using NovoSPT you can estimate bearing capacity of pad / strip footings based on SPT blow counts.

  • Burland & Burbidge, 1985
  • Terzaghi
  • Bowles / Meyerhof, 1976
  • Parry, 1977
  • Peck et al., 1974

Wildcat and Durham Dynamic Penetrometer (DCP) Modules

NovoSPT can also convert the following Dynamic Cone Penetration (DCP) soundings to equivalent SPT blow counts. These equivalent N60 values, can then be used for further correlations with soil properties:

1000+ Consulting Companies Around the World Use Novo Tech

Our software is presented with flexible licensing in mind! You do not have to sign into expensive subscription-based contracts. Every company has different budget, licensing preference and purchasing timeline. Our flexible licensing model works based on the number of software packages, and number of licenses purchased.

Contact us today; We provide you the best licensing solution that fits your company needs and budget.


If you would like to learn more about the theoretical background of the methods used in NovoSPT, please visit its online documentation.